Safety

Special Education Transportation in 2027: What to Know

Margaret Barnett | November 17, 2026

Special education transportation rules are changing in 2027, and every state is changing them differently. That affects two things you’re responsible for: your buses and the people trained to use them. The teams that stay ahead will plan both together, before the next order goes in.

The good news: you don’t have to sort it out alone. Here’s what’s changing, what to check before your next bus is built, and how Model 1 can help your team prepare.

Attendant securing a student's wheelchair with four-point tiedowns on a special education bus.

What’s Shaping Special Education Transportation in 2027

Three changes show where this is heading: new national specs, a closer look at who’s trained to secure students, and state rules that change with every model year. 

States Are Deciding on the National Specs

The 2025 National School Transportation Specifications and Procedures (NSTSP) is the national guidance states draw on when they write their own rules. Eight states adopt it in full, and many more borrow parts of it.

The latest edition updated best practices for students with disabilities, including how wheelchair lifts and child safety seats are used. If your state signs on, your buses, training and inspections will change with it.

This month, Tennessee said its departments of education and safety agreed to adopt the updated specs in full as statewide best-practice guidance. Expect more states to follow.

Training Is Under the Microscope

While specs shape the bus, states are also taking a closer look at the people who ride with students every day.

In January 2026, New Jersey created a 23-member Special Education Transportation Task Force to review who’s qualified to work with students on the bus and how staff should respond to medical and behavioral emergencies.

You don’t need to wait for your state to ask – two steps put you ahead now:

  • Keep a simple record of who’s trained to secure students, and on which bus’s equipment.
  • Make sure every driver and aide on a route knows the emergency plan for each student who has one.

State Specs Update Every Model Year

Some states publish specs by model year. Alabama’s 2027 minimum school bus specifications became mandatory for buses ordered starting April 1, 2026, and buses that don’t meet them won’t be certified.

In other words, the date on your purchase order decides which rulebook your bus must meet.


Specs vary by state, and they keep changing. Talk to a Model 1 specialist about building to your state’s current requirements.


Where State Rules Still Differ

Wheelchair securement rules aren’t the same everywhere. Here’s how three states compare:

State Wheelchair securement Occupant restraint Worth knowing
Pennsylvania Forward-facing, minimum four anchorage points Three-point lap and upper torso Must meet the federal wheelchair securement standard (FMVSS 222)
New Jersey Forward-facing, two front and two rear floor anchorages Lap/shoulder belt meeting FMVSS 209 and 210 Requires crash testing to SAE J2249; bans T-hooks and vinyl belts
Iowa Facing the front; no side-facing Lap and torso restraint meeting FMVSS No securement position directly in front of the lift door; 30-inch aisles

That’s where we come in. Model 1 tracks how these requirements differ from state to state, so wherever your bus ships from, we spec it to your state’s rules.

Before you order for 2027, get answers to three questions. A Model 1 specialist can confirm them for your state before the order is written:

  1. What’s the current spec year?
  2. Which edition of the national specs do our rules follow?
  3. Is a revision underway?

Student in a wheelchair secured with tiedowns on a special needs transportation bus alongside classmates.

Checklist: Before You Order for the 2027–28 School Year

Changing a floor plan after the bus arrives is costly, if it’s possible at all. These items are based on federal standards (FMVSS) and the 2025 National School Transportation Specifications and Procedures, so they apply in most states, but your state may add its own requirements.

Before the order is written, run this list with whoever writes it:

Securement and Lift

  • Floor space: A 30-by-48-inch area for each wheelchair position (the national recommendation).
  • Lift placement: Keep the lift door and the path to emergency exits clear of wheelchair positions.
  • Tested as a system: Look for wheelchair straps and a student belt crash-tested together – ask us for the test paperwork and diagrams when you order.
  • Electrical: Buses with an electric lift and/or A/C need at least a 240-amp alternator under the 2025 national specs, so the two don’t compete for power – your state’s number may differ.

Seating and Restraints

  • Seats vs. wheelchair positions: Every wheelchair position changes how many seats on a school bus you get. Start with next year’s IEPs, and consider flex or fold-away seating so one wheelchair accessible bus covers more routes – send us your counts, and we’ll show you layouts that fit.
  • Child safety seats: Any child safety restraint system (CSRS) on board must meet FMVSS 213, the federal child-seat standard.
  • Equipment stays matched: The straps and child seats from your school buses often don’t transfer to vans or other non-school bus vehicles. If you run both, spec each one separately, and we’ll help you match the equipment.

Want a second set of eyes? Compare configurations across Model 1’s school bus and activity bus lineup with our specialists.


Weighing lifts, ramps, and accessible vehicle types? Start with our ADA Buying Guide.


Set Your 2027 Training Plan Around the Vehicle

Training came up again and again at this month’s Transporting Students with Disabilities and Special Needs (TSD) Conference. On a panel about the national specs, Megan Elsberry, a master wheelchair securement trainer at Cleveland ISD in Texas, questioned whether teams get enough training to secure students and their mobility equipment the same way every time.

Her point: drivers and attendants need clear, hands-on guidance on the equipment they actually use.

The gap usually isn’t effort – it’s training on the specific equipment. A driver who learned on one tiedown system can struggle with another, at the curb, with a student waiting.

Build your 2027 calendar around current best practices:

  • Your state sets the minimum refresher schedule, which can be anywhere from every year to every several years. Don’t wait that long on securement: build a short hands-on refresher into the in-service you already hold, and retrain when equipment, standards or staff change.
  • Cross-train your backup drivers too, not only drivers on special education routes – subs often end up on those routes.
  • When your 2027–28 buses arrive, schedule hands-on time on each one’s lift and securement system before it goes on a route.

Ask your Model 1 specialist what’s different before the new bus arrives, so your training is ready when it is.

Transportation director showing a driver how to secure a wheelchair in a bus with four-point tiedowns.

Ready to Plan for 2027?

Every change here points the same way: plan the bus and the training together, so every student gets the same safe ride no matter which bus or driver shows up.

With Model 1, you can:

  • Match the bus to your state spec before the order is written.
  • Compare lift, securement, and seating layouts across school bus and accessible vehicle options.
  • Find the funding with help from our Grant Services team.

➡️ Talk to our team today

FAQ: Special Education Transportation in 2027

Q: Is there a new federal special education transportation requirement in 2027?

No single federal change takes effect in 2027. The changes are happening at the state level, as states update their bus specs, decide whether to adopt the 2025 national specifications and review training requirements.

Q: Do states have to follow the 2025 national specifications?

No. The NSTSP is national guidance, and each state decides whether to adopt it in full, in part or not at all. Tennessee, for example, is adopting the updated specs in full as best-practice guidance.

Q: How do you secure a wheelchair on a school bus, and which way should it face?

Forward-facing, with four-point, strap-type tiedowns on the wheelchair and a separate lap-and-shoulder belt on the student, installed to FMVSS 222. Follow the manufacturer’s instructions for the specific system on that bus.

Q: How many seats does a school bus lose for each wheelchair position?

It depends on the floor plan. Each wheelchair position needs roughly a 30-by-48-inch clear area, so it takes space seats would otherwise use. Flex or fold-away seating lets one bus switch layouts.

Q: How often should drivers be retrained on wheelchair securement?

Your state sets the minimum, which ranges from every year to every several years. For securement, don’t wait for the minimum: build a refresher into the in-service you already hold, and retrain right away when equipment, standards or staff change. Training should happen on the actual lift and securement system each driver will use.

 

Images may be AI-generated or enhanced and are for illustration only.